[2018-Apr.–Update] The Best Cisco 300-115 Dumps CCDP Exam Questions 100% Pass With A High Score Video Study

Where can one get notes for 300-115 dumps? The Best Pass4itsure Cisco 300-115 Dumps Questions, Real Cisco 300-115 Dumps Certification Exam 100% Pass With A High Score, We Help You Pass Implementing Cisco IP Switched Networks – pass4itsure 300-115 dumps download 543Q Offer()

It is recognized that the Implementing Cisco IP Switched Networks (SWITCH) 300-115 dumps exam questions will be the hot test associated with Cisco 300-115 dumps practice exam qualification. Pass4itsure.com provide latest and updated braindumps with actual exam questions answers for new syllabus of Cisco 300-115 dumps exam. We provide you with the entire 543Q&A from the Implementing Cisco IP Switched Networks study guide. This could be the evaluation on the perfect combination and it will allow you to move Cisco 300-115 dumps Implementing Cisco IP Switched Networks study guide from initially!

Practice our real questions and answers to Improve your knowledge and pass your exam with high marks. A lot of companies are offering cheap 300-115 dumps for Implementing Cisco IP Switched Networks exam but with little to no good results. It’s essential for each individual to have current and valid Cisco Implementing Cisco IP Switched Networks in pass4itsure.com. Besides that, there is not as such requirement of the Implementing Cisco IP Switched Networks. We ensure your success in the test center, covering all the topics of exam and build your Knowledge of the 300-115 exam.

Pass4itsure Cisco Exam 300-115 Dumps Blog Series 

QUESTION 6
Refer to the exhibit.
300-115 dumps
A network engineer wants to analyze all incoming and outgoing packets for an interface that is connected to an access switch. Which three items must be configured to mirror traffic to a packet sniffer that is connected to the distribution switch? (Choose three.)
A. A monitor session on the distribution switch with a physical interface as the source and the remote SPAN VLAN as the destination
B. A remote SPAN VLAN on the distribution and access layer switch
C. A monitor session on the access switch with a physical interface source and the remote SPAN VLAN as the destination
D. A monitor session on the distribution switch with a remote SPAN VLAN as the source and physical interface as the destination
E. A monitor session on the access switch with a remote SPAN VLAN source and the physical interface as the destination
F. A monitor session on the distribution switch with a physical interface as the source and a physical interface as the destination
300-115 exam Correct Answer: BCD
Explanation
Explanation/Reference:
Explanation:
You can analyze network traffic passing through ports or VLANs by using SPAN or RSPAN to send a copy of the traffic to another port on the switch or on another switch that has been connected to a network analyzer or other monitoring or security device. SPAN copies (or mirrors) traffic received or sent (or both) on source ports or source VLANs to a destination port for analysis. RSPAN supports source ports, source VLANs, and destination ports on different switches (or different switch stacks), enabling remote monitoring of multiple switches across your network. The traffic for each RSPAN session is carried over a user-specified RSPAN VLAN that is dedicated for that RSPAN session in all participating switches. The RSPAN traffic from the source ports or VLANs is copied into the RSPAN VLAN and forwarded over trunk ports carrying the RSPAN VLAN to a destination session monitoring the RSPAN VLAN. Each RSPAN source switch must have either ports or VLANs as RSPAN sources. The destination is always a physical port
Reference:

QUESTION 7
After an EtherChannel is configured between two Cisco switches, interface port channel 1 is in the down/down state. Switch A is configured with channel-group 1 mode active, while Switch B is configured with channel-group 1 mode desirable. Why is the EtherChannel bundle not working?
A. The switches are using mismatched EtherChannel negotiation modes.
B. The switch ports are not configured in trunking mode.
C. LACP priority must be configured on both switches.
D. The channel group identifier must be different for Switch A and Switch B.
Correct Answer: A
Explanation
Explanation/Reference:
Explanation:
Here we have a situation where one switch is using active mode, which is an LACP mode, and the other is using desirable, which is a PAGP mode. You can not mix the LACP and PAGP protocols to form an etherchannel. Here is a summary of the various etherchannel modes:
EtherChannel PAgP Modes
Mode Description
auto Places a port into a passive negotiating state, in which the port responds to PAgP packets it receives but does not start PAgP packet negotiation. This setting minimizes the transmission of PAgP packets. This mode is not supported when the EtherChannel members are from differ- ent switches in the switch stack (cross-stack EtherChannel).
desirable Places a port into an active negotiating state, in which the port starts negotia- tions with other ports by sending PAgP packets. This mode is not supported when the EtherChannel members are from differ- ent switches in the switch stack (cross-stack EtherChannel).
EtherChannel LACP Modes
Mode Description
active Places a port into an active negotiating state in which the port starts negotia- tions with other ports by sending LACP packets. passive Places a port into a passive negotiating state in which the port responds to LACP packets that it receives, but does not start LACP packet negotiation. This setting minimizes the transmission of LACP packets.

QUESTION 8
An EtherChannel bundle has been established between a Cisco switch and a corporate web server. The network administrator noticed that only one of the EtherChannel links is being utilized to reach the web server. What should be done on the Cisco switch to allow for better EtherChannel utilization to the corporate web server?
A. Enable Cisco Express Forwarding to allow for more effective traffic sharing over the EtherChannel bundle.
B. Adjust the EtherChannel load-balancing method based on destination IP addresses.
C. Disable spanning tree on all interfaces that are participating in the EtherChannel bundle.
D. Use link-state tracking to allow for improved load balancing of traffic upon link failure to the server.
E. Adjust the EtherChannel load-balancing method based on source IP addresses.
300-115 dumps Correct Answer: E
Explanation
Explanation/Reference:
Explanation:
EtherChannel load balancing can use MAC addresses, IP addresses, or Layer 4 port numbers, and either source mode, destination mode, or both. The mode you select applies to all EtherChannels that you configure on the switch. Use the option that provides the greatest variety in your configuration. For example, if the traffic on a channel only goes to a single MAC address (which is the case in this example, since all traffic is going to the same web server), use of the destination MAC address results in the choice of the same link in the channel each time. Use of source addresses or IP addresses can result in a better load balance.

QUESTION 9
Interface FastEthernet0/1 is configured as a trunk interface that allows all VLANs. This command is configured globally: monitor session 2 filter vlan 1 – 8, 39, 52 What is the result of the implemented command?
A. All VLAN traffic is sent to the SPAN destination interface.
B. Traffic from VLAN 4 is not sent to the SPAN destination interface.
C. Filtering a trunked SPAN port effectively disables SPAN operations for all VLANs.
D. The trunk’s native VLAN must be changed to something other than VLAN 1.
E. Traffic from VLANs 1 to 8, 39, and 52 is replicated to the SPAN destination port.
Correct Answer: E
Explanation
Explanation/Reference:
Explanation:
The “monitor session filter” command is used to specify which VLANS are to be port mirrored using SPAN. This example shows how to monitor VLANs 1 through 5 and VLAN 9 when the SPAN source is a trunk interface: Switch(config)# monitor session 2 filter vlan 1 – 5 , 9

QUESTION 10
A network engineer notices inconsistent Cisco Discovery Protocol neighbors according to the diagram that is provided. The engineer notices only a single neighbor that uses Cisco Discovery Protocol, but it has several routing neighbor relationships. What would cause the output to show only the single neighbor?
A. The routers are connected via a Layer 2 switch.
B. IP routing is disabled on neighboring devices.
C. Cisco Express Forwarding is enabled locally.
D. Cisco Discovery Protocol advertisements are inconsistent between the local and remote devices.
300-115 pdf Correct Answer: A
Explanation
Explanation/Reference:
Explanation:
If all of the routers are connected to each other using a layer 2 switch, then each router will only have the single switch port that it connects to as its neighbor. Even though multiple routing neighbors can be formed over a layer 2 network, only the physical port that it connects to will be seen as a CDP neighbor. CDP can be used to determine the physical topology, but not necessarily the logical topology.

QUESTION 11
After the implementation of several different types of switches from different vendors, a network engineer notices that directly connected devices that use Cisco Discovery Protocol are not visible. Which vendor-neutral protocol could be used to resolve this issue?
A. Local Area Mobility
B. Link Layer Discovery Protocol
C. NetFlow
D. Directed Response Protocol
Correct Answer: B
Explanation
Explanation/Reference:
Explanation:
The Link Layer Discovery Protocol (LLDP) is a vendor-neutral link layer protocol in the Internet Protocol Suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, principally wired Ethernet. LLDP performs functions similar to several proprietary protocols, such as the Cisco Discovery Protocol (CDP).

QUESTION 12
Several new switches have been added to the existing network as VTP clients. All of the new switches have been configured with the same VTP domain, password, and version. However, VLANs are not passing from the VTP server (existing network) to the VTP clients. What must be done to fix this?
A. Remove the VTP domain name from all switches with “null” and then replace it with the new domain name.
B. Configure a different native VLAN on all new switches that are configured as VTP clients.
C. Provision one of the new switches to be the VTP server and duplicate information from the existing network.
D. Ensure that all switch interconnects are configured as trunks to allow VTP information to be transferred.
Correct Answer: D
Explanation
Explanation/Reference:
Explanation:
VTP allows switches to advertise VLAN information between other members of the same VTP domain. VTP allows a consistent view of the switched network across all switches. There are several reasons why the VLAN information can fail to be exchanged. Verify these items if switches that run VTP fail to exchange
VLAN information:
VTP information only passes through a trunk port. Make sure that all ports that interconnect switches are configured as trunks and are actually trunking. Make sure that if EtherChannels are created between two switches, only Layer 2 EtherChannels propagate VLAN information. Make sure that the VLANs are active in all the devices. One of the switches must be the VTP server in a VTP domain. All VLAN changes must be done on this switch in order to have them propagated to the VTP clients. ·The VTP domain name must match and it is case sensitive. CISCO and cisco are two different domain names.
Make sure that no password is set between the server and client. If any password is set, make sure that the password is the same on both sides.

QUESTION 13
After implementing VTP, the extended VLANs are not being propagated to other VTP switches. What should be configured for extended VLANs?
A. VTP does not support extended VLANs and should be manually added to all switches.
B. Enable VTP version 3, which supports extended VLAN propagation.
C. VTP authentication is required when using extended VLANs because of their ability to cause network instability.
D. Ensure that all switches run the same Cisco IOS version. Extended VLANs will not propagate to different IOS versions when extended VLANs are in use.
300-115 vce Correct Answer: B
Explanation
Explanation/Reference:
Explanation:
VTP version 1 and VTP version 2 do not propagate configuration information for extended- range VLANs (VLAN numbers 1006 to 4094). You must configure extended-range VLANs manually on each network device. VTP version 3 supports extended-range VLANs (VLAN numbers 1006 to 4094). If you convert from VTP version 3 to VTP version 2, the VLANs in the range 1006 to 4094 are removed from VTP control.
Reference:

Do you offer free after-sale services?

Yes. We provide 7/24 customer help and information on a wide range of issues. Pass4itsure with our accurate questions. The purpose of pass4itsure Cisco CCNP Routing/Switching 300-115 SWITCH Training 300-115 dumps is to promote Cisco 300-115 Implementing Cisco IP Switched Networks Certification exam. Our service is professional and confidential and your issues will be replied within 12 hous. Feel free to send us any questions and we always try our best to keeping our Customers Satisfied.

[2018-Apr.–Update Pass4itsure Cisco 300-115 Dumps PDF Updation From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWLW41Sk5QSDdPTFU

[2018-Apr.–Update Pass4itsure Cisco 300-135 Dumps PDF Updation From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWVjNzVmpXTDBzU00

There are sample questions available on our websites, from which you can determine the quality of our products. It’s surely not an easy task to do but doing the 300-115 Cisco certification exam by using Cisco CCNP Routing/Switching 300-115 SWITCH Training 300-115 Dumps will ensure and encourage that you can earn the Cisco 300-115 dumps test. Our study guide certification assures you passing your exam in your first attempt with high scores and become Cisco certified professional.
300-115 dumps
If you choose pass4itsure, success is not far away for you. And soon you can get Cisco certification 300-115 dumps certified. The product of pass4itsure not only can 100% guarantee you to pass the exam, but also can provide you a free one-year update service. Selecting shortcut and using technique are to get better success. You can download certification test and start preparing your Cisco 300-115 dumps right now. If you want to get security that you can pass Cisco 300-115 dumps free download at the first attempt, pass4itsure Cisco 300-115 dumps free download is your unique and best choice.
pass4itsure 300-115 dumps
The Best Pass4itsure Cisco 300-115 Dumps Questions Certification Implementing Cisco IP Switched Networks Exam 100% Pass With A High Score Youtube Training. Pass4itsure 300-115 Dumps Exam Youtube Free Online Test Here: